Water adequacy determination information including the subdivision name, location, number of lots, adequacy determination, reason for the inadequacy determination, date of determination and subdivision water provider are shown in Table 4.4-8A and B for water reports and analysis of adequate water supply. Figure 4.4-11 shows the locations of subdivisions keyed to the Table.
For a description of the Adequacy Program click here. For adequacy determination data sources and methods click here. For more information on adequacy determinations in the Big Sandy Basin see Section 4.0.5 - Population.
-
All subdivisions receiving an adequacy determination are in Mohave County. Fifty water adequacy determinations have been made in this basin through December 2008. Of the 19,387 lots in 49 subdivisions for which lot information is available 10,969 lots, or 57%, were determined to be adequate.
-
The most common reason for an inadequacy determination was because the applicant decided not to submit necessary information and/or available hydrologic data were insufficient to make a determination.
-
Six analysis of Adequate Water Supply applications, for a total of 259,966 lots, have been approved for this basin.
|
Click for Table 4.4-8 Adequacy Determinations in the Hualapai Valley Basin
Click for Figure 4.4-11 Hualapai Valley Basin
Adequacy Determinations |
Arizona Department of Water Resources
Statewide Planning, Water Atlas owner of this page.
