Water adequacy determination information including the subdivision name, location, number of lots, adequacy determination, reason for the inadequacy determination, date of determination and subdivision water provider are shown in Table 4.1-9. Figure 4.1-11 shows the locations of subdivisions keyed to the Table. A description of the Water Adequacy Program is found in Volume 1, Appendix C. Adequacy determination data sources and methods are found in Volume 1, Appendix A. For a description of the Adequacy Program click here. For adequacy determination data sources and methods click here. For more information on adequacy determinations in the Big Sandy Basin see Section 4.0.5 - Population.
-
All lots receiving an adequacy determination are in Mohave County. Four water adequacy determinations
-
Data on the number of lots with an adequate determination was not available to the Department. Three determinations of inadequacy with a total of 608 lots have been made; all located in the northern portion of the basin.
-
All inadequacy determinations were because the applicant chose not to submit necessary information and/or available hydrologic data was insufficient to make a determination.
|

Click for Table 4.1-9 Adequacy Determinations in the Big Sandy Basin

Click for Figure 4.1-11 Big Sandy Basin Adequacy Determinations |